yang686526

2.7.1: wrong text height/line spacing with this dwg
2.7.1: wrong text height/line spacing with this dwg
the attached dwg shows a problem with the text height/line spacing of a text list on the right side of the dwg
i tested it with the native autocad trueview 2009 viewer and the text heights are correct in such case.
opening the same dwg with odamfcapp 2.7.1, shows the problem.
in particular, look at the line 12: 12001046 (4x) on the table: the 12001046 (4x) is relative to the item #11 and not #12, as you can verify with the autocad trueview 2009.
let me know if you are able to reproduce the issue and when do you think it will be fixed, or, alternatively, how i can workaround the problem
regards,
ciro ettorre
attached files
hello,
we are not to reproduce the issue. there is no problem with rendering mtext in attached file here. the result is the same in acad and odamfcapp. could you attache screen shot from odamfcapp with problem place? possible it will be helpful.
best regards,
sergey z.
here you go
attached images (539.0 kb, 3 views)

hello,
dwg trueview and adamfcapp use different fonts for rendering text. you need to make txt.shx font available for odamfcapp. i suppose odamfcapp uses build in font now. you may try to set environment varible acad=<font folder> (for example, acad= c:\program files\acad 2009\fonts). more detail see dwgdirect reference "font handling" topic.
best regards,
sergey z.
thanks !
it works perfectly now !!
regards,
ciro