几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - 【转帖】measuring slots

measuring slots
i need to measure a slot with a radius on each side ? how do i construct it ?
does your 'level' of cdmis include (in auto features) the slot? either round or square, if one is there, they both are (i think). if your auto features do not include the slot otion, then you can not measure a slot as a slot or construct one or anything else.
__________________
what version are you running. if you have auto feature round slot you do not need cad to use it. you have it marked with three samle hits on surface. take the three samle hits on the surface then three hits on each radius. if you do no have the round slot measure each end as a circle and construct and round solt from them.
__________________
thanks (cad is always master)
niven

2009-04-06, 08:07 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	【转帖】measuring slots - c-dmis user forum.txt measuring slots i need to measure a slot with a radius on each side ? how do i construct it ? does your 'level' of cdmis include (in auto features) the slot? either round or square, if one is there, they both are (i think). if your auto features do not include the slot otion, then you can not measure a slot as a slot or construct one or anything else. __________________ what version are you running. if you have auto feature round slot you do not need cad to use it. you have it marked with three samle hits on surface. take the three samle hits on the surface then three hits on each radius. if you do no have the round slot measure each end as a circle and construct and round solt from them. __________________ thanks (cad is always master) niven __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]