几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

wind connection to bottom flange
hi
i have a warehouse 100'x100' with perimeter moment frames. it is a 37' high structure. i have joists at 11'. the roof deck needs to transfer force to the perimeter frame. the exterior masonry wall is connected to the bottom flange of the exterior w27. how do i transfer force from bottom flange to he roof deck?
the force is approx .25k/ft
check out our whitepaper library.
kickers from bottom flange up to top chord of joists.
or
span wall to top flange of beam inside of the bottom.
oops...i typed it too fast!
span wall to top flange of beam instead of the bottom.

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-16, 09:31 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	wind connection to bottom flange wind connection to bottom flange hi i have a warehouse 100'x100' with perimeter moment frames. it is a 37' high structure. i have joists at 11'. the roof deck needs to transfer force to the perimeter frame. the exterior masonry wall is connected to the bottom flange of the exterior w27. how do i transfer force from bottom flange to he roof deck? the force is approx .25k/ft check out our whitepaper library. kickers from bottom flange up to top chord of joists. or span wall to top flange of beam inside of the bottom. oops...i typed it too fast! span wall to top flange of beam instead of the bottom. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]