查看单个帖子
旧 2009-09-16, 08:56 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 where i can find frostline in ontrio

where i can find frostline in ontrio
ontario building code give 4', but i want to have a detail data for gta. i want to build a small deck and don't want to make so deep a foundation.
1.2 m is far too shallow if you live in wawa or thunder bay. so, where do you live? what type of soils do you have. frost depth data should be available from mtc - or you local building department. you also need to determine whether you have a frost problem. if you are founded on sand with water table deep (say 3 m deep), the soil should be considered non-frost susceptible and you can get a variance from the depth of foundations. talk to a geotech in your area.
gta? what's that? grand theft auto? so put your foundation on the surface and be prepared to see your deck move with the frost. as long as you don't tie it into anything more deeply rooted in the ground, who cares?
ba
thank you.
i live in mississauga. i feel the frostline may be less than 1.2m.
it's a small deck (3mx3m) in backyard, i wish the foundation is simple as possible.
if it isn't tied into a deep foundation, let if float. what is the problem?

ba
gta = greater toronto area?
if the deck is not tied to the house, i do not see a problem with it floating, if it is, obviously things change.
you might want to check the local requirements. is a building permit required? if so, your feelings about frostline depth might be irrelevant compared with what is required to get the building permit.
where is ontrio?
to kelowna,
i like to separate the deck from house so it'll not need permit. i try to find the frostline because i'm afraid the foundation above frostline and may have big displacement.
call and ask the local building department.
mike mccann
mmc engineering
3m x 3m? i'd put it on sleepers. if i got tired of where it was, i'd move it
regards,
mike
do you worry about your sidewalks too?
ba
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)