几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - when are the special seismic load combinations used

when are the special seismic load combinations used?
can someone tell what section of either ibc '03 or asce 7-02 calls out the use of the "special seismic load combinations of ibc section 1605.4 and asce 7-02 9.5.2.7.1?
ibc says where specifically called out in sections 1613 through 1622 or in chapters 18 through 23. the only reference i found was for the design of collectors in seismic design category c and above. are these load combinations used to evaluate anything else?
check out our whitepaper library.
here's a similar thread:

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-16, 08:43 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	when are the special seismic load combinations used when are the special seismic load combinations used? can someone tell what section of either ibc '03 or asce 7-02 calls out the use of the "special seismic load combinations of ibc section 1605.4 and asce 7-02 9.5.2.7.1? ibc says where specifically called out in sections 1613 through 1622 or in chapters 18 through 23. the only reference i found was for the design of collectors in seismic design category c and above. are these load combinations used to evaluate anything else? check out our whitepaper library. here's a similar thread: __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]