几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

welding of crane runways
canpeng (visitor)10 aug 02 14:21
our canadian welding code csa w59 governs the welding of crane runways. a built-up shape consistimg of a "w" shape and a "c" shape cap are customarily welded with intermittent fillet welds that are 3" on 12" or 4" on 12". the actual size of weld and length would be governed by the loading condition. in the chapter under dynamic loading there is a provision that requires the clear space between the welds to be 12 times the thickness of the least thick material. if the web of the "c" was 1/4" the clear space would 3". runway fabricators are ignoring this provision because of the extra welding and the problem of distortion. some structural engineers are starting to enforce it which results in messy disputes. it is my understanding that this clause of our code is borrowed from aashto or aws d1.1. is anyone aware of the research that this is based on or is there a commentary available ?

2009-09-16, 07:59 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	welding of crane runways welding of crane runways canpeng (visitor)10 aug 02 14:21 our canadian welding code csa w59 governs the welding of crane runways. a built-up shape consistimg of a "w" shape and a "c" shape cap are customarily welded with intermittent fillet welds that are 3" on 12" or 4" on 12". the actual size of weld and length would be governed by the loading condition. in the chapter under dynamic loading there is a provision that requires the clear space between the welds to be 12 times the thickness of the least thick material. if the web of the "c" was 1/4" the clear space would 3". runway fabricators are ignoring this provision because of the extra welding and the problem of distortion. some structural engineers are starting to enforce it which results in messy disputes. it is my understanding that this clause of our code is borrowed from aashto or aws d1.1. is anyone aware of the research that this is based on or is there a commentary available ? __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]