几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

washers?
i am looking for a certain type of washer, but i do not know what it is called. our building has i-beam columns and between the columns there is cross-bracing. the cross bracing consists of tension only threaded rods. the threaded rods go through a punched hole in the i beams web and are tightened on each end. under the nut there is a special washer. it is flat on one side and round on the other. it is used to compensate for the angle between the threaded rod and the column. i cannot find these washers, and i do not know what they are called. can anyone help?
thanks
steelforbrains,
the carr lane catalogue has spherical washers. their website,
tapered washers or half moon washers.
bevelled washer

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-16, 07:04 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	washers washers? i am looking for a certain type of washer, but i do not know what it is called. our building has i-beam columns and between the columns there is cross-bracing. the cross bracing consists of tension only threaded rods. the threaded rods go through a punched hole in the i beams web and are tightened on each end. under the nut there is a special washer. it is flat on one side and round on the other. it is used to compensate for the angle between the threaded rod and the column. i cannot find these washers, and i do not know what they are called. can anyone help? thanks steelforbrains, the carr lane catalogue has spherical washers. their website, tapered washers or half moon washers. bevelled washer __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]