几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

vortex shedding; sts-1-2006
hello all;
to calculate equivalent static vortex loading, asme sts-1-2006 uses a "normalized mode shape". how does one calculate this "normalized mode shape". i use risa to calculate the natural frequency and mode shapes of the stack, but how do you make the mode shape into a normalized mode shape? thanks.
mark416.
there are at least two normalization methods. one does it on a mass x deflection^2 basis, the other just on a deflection^2 basis, the ij subscripts have been ignored...
you have to look at their analysis to sort it out. just text book issues, but you have to be consistent with what they've done.
good luck

just to make sure that i got it right (with out a text book), normalized mode shape = n/{sum(mass*n^2)}^2 where n=mode shape. is this anything close to it.
thanks,
mark.

2009-09-16, 06:40 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	vortex shedding; sts-1-2006 vortex shedding; sts-1-2006 hello all; to calculate equivalent static vortex loading, asme sts-1-2006 uses a "normalized mode shape". how does one calculate this "normalized mode shape". i use risa to calculate the natural frequency and mode shapes of the stack, but how do you make the mode shape into a normalized mode shape? thanks. mark416. there are at least two normalization methods. one does it on a mass x deflection^2 basis, the other just on a deflection^2 basis, the ij subscripts have been ignored... you have to look at their analysis to sort it out. just text book issues, but you have to be consistent with what they've done. good luck just to make sure that i got it right (with out a text book), normalized mode shape = n/{sum(mass*n^2)}^2 where n=mode shape. is this anything close to it. thanks, mark. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]