几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

vertcial vessel grouting
i am designing foudnations for some large vertical vessels. we always grout, but i have always based the grout thickness on the vendor reccomendations, unless i felt it was inadequate. i am dealing with a 130' tall vessel that weights over 315 kips, empty. the base ring is about 9" id and 11' od. is there any rule of thumb or table for cement based grout thickness? i want to use a pourable grout in order to make sure the anchor bolt sleaves are grouted. any help would be appreciated
suggestion, use a clear crush rock as a base and you can permeate the rock with grout as well as using thinner grout on top this should act as a compete solid unit and will give you sufficient anchor depth.
intrusion prepakt /marineconcrete.com

2009-09-16, 06:14 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	vertcial vessel grouting vertcial vessel grouting i am designing foudnations for some large vertical vessels. we always grout, but i have always based the grout thickness on the vendor reccomendations, unless i felt it was inadequate. i am dealing with a 130' tall vessel that weights over 315 kips, empty. the base ring is about 9" id and 11' od. is there any rule of thumb or table for cement based grout thickness? i want to use a pourable grout in order to make sure the anchor bolt sleaves are grouted. any help would be appreciated suggestion, use a clear crush rock as a base and you can permeate the rock with grout as well as using thinner grout on top this should act as a compete solid unit and will give you sufficient anchor depth. intrusion prepakt /marineconcrete.com __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]