几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

using com624 program
i have not used com24, but can you just apply a horizontal force at the top of the pile, and adjust it by trial and error until you get the lateral deflection you want?
i designed an integral abutment several years ago and used the aisi document you refer to. i called the author of the paper and he told me that he used a trial and error solution by varying the loads at the top of the pile.
originatorvisitor (visitor)4 mar 02 13:26
thank you both, specially the second post is reasuring. because i ended up doing just that !
thanks again,

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-16, 05:54 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	using com624 program using com624 program i have not used com24, but can you just apply a horizontal force at the top of the pile, and adjust it by trial and error until you get the lateral deflection you want? i designed an integral abutment several years ago and used the aisi document you refer to. i called the author of the paper and he told me that he used a trial and error solution by varying the loads at the top of the pile. originatorvisitor (visitor)4 mar 02 13:26 thank you both, specially the second post is reasuring. because i ended up doing just that ! thanks again, __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]