几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

tube bracing & eccentricity
hello,
i am about to use hss tube (6x6x3/16) as x-bracing in a large arena. the tubes will be split in the middle by a rounded out gusset plate. the coonection to the gusset plate will be on one flange of the tube (not the center). is it necessary to consider eccentricity in this bolted connection and in the connection of the tube to the columns/beams?
aisc volume ii seems to ignore this eccentricity in all their connection examples and i am not clear if this is considered industry standard.
thanks in advance.
js.
check out our whitepaper library.
you should consider eccentricity. also consider compactness. if the braces will be subjected to high seismic forces they should be "seismically compact" (see 2002 aisc seismic provisions table i-8-1). otherwise, local buckling of the tube walls (oil-canning) can lead to premature brittle fracture. if this is a conceren, you may need to bump up the size to hss 6x6x3/8.

2009-09-16, 04:06 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	ube bracing eccentricity tube bracing & eccentricity hello, i am about to use hss tube (6x6x3/16) as x-bracing in a large arena. the tubes will be split in the middle by a rounded out gusset plate. the coonection to the gusset plate will be on one flange of the tube (not the center). is it necessary to consider eccentricity in this bolted connection and in the connection of the tube to the columns/beams? aisc volume ii seems to ignore this eccentricity in all their connection examples and i am not clear if this is considered industry standard. thanks in advance. js. check out our whitepaper library. you should consider eccentricity. also consider compactness. if the braces will be subjected to high seismic forces they should be "seismically compact" (see 2002 aisc seismic provisions table i-8-1). otherwise, local buckling of the tube walls (oil-canning) can lead to premature brittle fracture. if this is a conceren, you may need to bump up the size to hss 6x6x3/8. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]