几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

the steel construction manual
we are using a drawing (4-12-07) for a new steel erection project started in january 2008, referencing the "ninth edition of the steel construction manual"
i understand the 13th edition is the current document.
does the ninth edition reference aisc 346 (cancelled in 2005) and replaced by aisc 360-05?
we keep finding references to aisc 346 currently; in particular "design formulas for gapped k-connections, and t-, y-, and cross connections stiffened with plates." section 8 in correspondence from our safety group.
are stiffening plates still recommended for k-, t-, y-, connections?
thanks.
i am not a structural engineer, my specialty is marine o & m engineering.
joe

check out our whitepaper library.
are you dealing with hollow structural
yes, hollow structural
i can't find any reference to aisc 346 in the 9th edition
thanks,we were having some base metal cracks after assembly and the safety folks were quoting aisc 346, we ran an analysis and found it was an assembly problem which hopefully has been corrected by the a&e and contractor.
really appreciate your support.
thanks,
joe

2009-09-16, 01:38 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	he steel construction manual the steel construction manual we are using a drawing (4-12-07) for a new steel erection project started in january 2008, referencing the "ninth edition of the steel construction manual" i understand the 13th edition is the current document. does the ninth edition reference aisc 346 (cancelled in 2005) and replaced by aisc 360-05? we keep finding references to aisc 346 currently; in particular "design formulas for gapped k-connections, and t-, y-, and cross connections stiffened with plates." section 8 in correspondence from our safety group. are stiffening plates still recommended for k-, t-, y-, connections? thanks. i am not a structural engineer, my specialty is marine o & m engineering. joe check out our whitepaper library. are you dealing with hollow structural yes, hollow structural i can't find any reference to aisc 346 in the 9th edition thanks,we were having some base metal cracks after assembly and the safety folks were quoting aisc 346, we ran an analysis and found it was an assembly problem which hopefully has been corrected by the a&e and contractor. really appreciate your support. thanks, joe __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]