几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - ek screws 9or self drilling screws0 in aluminum

tek screws (or self drilling screws) in aluminum
does anyone know where i can find design information on self drilling screws in aluminum (or even steel for that matter)?
check out our whitepaper library.
check w/ the mfg.... like hilti, fasental, dynamic,simpson, etc.
they all have tables.
try
the aluminum association (google it)
if you are using a self driller into aluminum or any dissimilar metal connection with a screw, make sure you use a screw that is specifically designed for dissimilar metal applications. otherwise, you may run into hascc (hydrogen assisted stress corrosion cracking) which can cause the heads of the screws to pop of over time. these screws have a hardend drill tip but the shank remains ductile so that embrittlement issues don't effect it's performance. i think most mfg's have some sort of screw for this application, here is an example.
you can get tek screws in 410 stainless.

2009-09-16, 12:55 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	ek screws 9or self drilling screws0 in aluminum tek screws (or self drilling screws) in aluminum does anyone know where i can find design information on self drilling screws in aluminum (or even steel for that matter)? check out our whitepaper library. check w/ the mfg.... like hilti, fasental, dynamic,simpson, etc. they all have tables. try the aluminum association (google it) if you are using a self driller into aluminum or any dissimilar metal connection with a screw, make sure you use a screw that is specifically designed for dissimilar metal applications. otherwise, you may run into hascc (hydrogen assisted stress corrosion cracking) which can cause the heads of the screws to pop of over time. these screws have a hardend drill tip but the shank remains ductile so that embrittlement issues don't effect it's performance. i think most mfg's have some sort of screw for this application, here is an example. you can get tek screws in 410 stainless. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]