几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

structural glass design code?
is there an american structural glass design code or manual. i've tried to to google this without much luck.
i am trying to provide calcs for a glass canopy, and need some design parameters and allowable physical properties. the canopy is supporting its own weight, snow load, and wind; and must span between supports. thanks in advance.
have you tried this in the glass forum?
also,
try this thread:
astm e 1300 according to the 2006 ibc.
don phillips
gana glazing manual should be given what you want.
i believe ibc2003 has some basic glass thickness and plate lengths vs load tables. see chapter 24
the ibc charts are the best way to go.
catch the link...

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-16, 11:23 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	structural glass design code structural glass design code? is there an american structural glass design code or manual. i've tried to to google this without much luck. i am trying to provide calcs for a glass canopy, and need some design parameters and allowable physical properties. the canopy is supporting its own weight, snow load, and wind; and must span between supports. thanks in advance. have you tried this in the glass forum? also, try this thread: astm e 1300 according to the 2006 ibc. don phillips gana glazing manual should be given what you want. i believe ibc2003 has some basic glass thickness and plate lengths vs load tables. see chapter 24 the ibc charts are the best way to go. catch the link... __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]