主题: slag block
查看单个帖子
旧 2009-09-15, 11:32 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 slag block

slag block
has anybody used slag block for floor construction? is this a kind of plank?
in the middle east it is common construction to use certain shaped blocks to fill in under concrete floor topping. the slab spans between concrete floor beams and or joists. i think it is a great idea. it saves on concrete, increases thermal and sound insulation between floors and reduces the dead load/weight of the structure.
i never designed one and i am not sure if i want to since i live in the us.
if you like more contact the jordanian engineers union and i am sure they can point you in the right direction.
thanks lutfi. this construction i have encountered in the us believe it or not. so it is a block that they fill with concrete at certain locations afterwards it seems.
how can i contact the jordanian association?
i would do a search on the internet. but since i am a nice guy, here is the link:
did you see it an older building? it may be one of the earliest precast concrete planks, such as dox plank, in which each of the plank were made by pre-compressing a row of concrete block together with reinforcing bars that were prestressed (but generally did not maintain the prestress because the low strength of the steel at that time did not adequately offset the prestress losses due to shrinkage, slippage, etc.). the block were generally 8"x8"x16", and the cross-section was set up for the reinforcing to be threaded through.
yes epr, it is an old school building. it is filled with concrete every 4'-0 or something where the reinforcement is. the rest is hollow.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)