几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

simpson hanger choice
i have a 12:12 roof pitch, 11 7/8" tji 210 roof joist framing into a (2) 1 3/4" lvl valley beam. the simpson hanger would need to be skewed 45 degrees and sloping 45 degrees, but the tables i am looking at only have a downsloping option for sloped conditions. are there any with upsloping conditions?
does that make sense?
pray like everything depends on god
work like everything depends on you.
before giving advise about a problem that i don't have all the information to, i would recommend you either calling your lumberyard, tj rep. in your area, or simpson strong-tie.
yes, simpson has awesome customer support. you probably get a much more accurate, up-to-date answer from them.
you may be able to use lsu hangers, page 82 of simpson's 2006 catalog.
you need to follow whodapookie's advice. aslo simpson should be able to do a custom of what you are asking for. on projects i've been involved with, i've used custom hangers sloped down 45 & skewed 45. i've used valley hangers skewed 45 and sloped up 39.
i appreciate the response. i did contact simpson and they are indeed very helpful.
pray like everything depends on god
work like everything depends on you.

2009-09-15, 10:52 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	simpson hanger choice simpson hanger choice i have a 12:12 roof pitch, 11 7/8" tji 210 roof joist framing into a (2) 1 3/4" lvl valley beam. the simpson hanger would need to be skewed 45 degrees and sloping 45 degrees, but the tables i am looking at only have a downsloping option for sloped conditions. are there any with upsloping conditions? does that make sense? pray like everything depends on god work like everything depends on you. before giving advise about a problem that i don't have all the information to, i would recommend you either calling your lumberyard, tj rep. in your area, or simpson strong-tie. yes, simpson has awesome customer support. you probably get a much more accurate, up-to-date answer from them. you may be able to use lsu hangers, page 82 of simpson's 2006 catalog. you need to follow whodapookie's advice. aslo simpson should be able to do a custom of what you are asking for. on projects i've been involved with, i've used custom hangers sloped down 45 & skewed 45. i've used valley hangers skewed 45 and sloped up 39. i appreciate the response. i did contact simpson and they are indeed very helpful. pray like everything depends on god work like everything depends on you. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]