查看单个帖子
旧 2009-09-15, 10:07 PM   #1
huangyhg
超级版主
 
huangyhg的头像
 
注册日期: 04-03
帖子: 18592
精华: 36
现金: 249466 标准币
资产: 1080358888 标准币
huangyhg 向着好的方向发展
默认 sheared edges vs. cut edges of structural steel

sheared edges vs. cut edges of structural steel.
re: asd table j3.5, minimum edge distances.
this table has listed "sheared edges" and "gas-cut or saw-cut edges"
i assume a sheared is a standard factory edge?
what are the differences? and what is standard for cut plate?
most cut plates are sheared, most probably. however, they may be gas cut as well if they are above certain thickness.
sheared edge is not a mill or rolled edge!
i hope this helps
lutfi
shearing is a fabrication process that causes cold working right at the sheared edge. flame cutting or saw cutting both induce heat and, to some degree, anneal the area of the cut. shearing is practical for thicknesses up to about 5/8", but after that, shearing is difficult (can be done if you have powerful enough shear....but most shops don't). after that, flame cutting is more practical, whether gas (oxy-acetylene) or plasma arc.
__________________
借用达朗贝尔的名言:前进吧,你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]
huangyhg离线中   回复时引用此帖
GDT自动化论坛(仅游客可见)