几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

screws safety factors
i have to check the b screws (subgirt to structure) of a building. the safety factors used in our company are undecided (from 2 to 4). could anybody suggest any refference for screws safety factors in construction?
thanks in advance.
check out our whitepaper library.
table 3.4 in
residential steel framing handbook
robert schareff and the editors of the walls and ceilings magazine
mc graw hill
1996
p. 71
gives capacity for steel to steel connections
for steel-to-steel in tension, i try to use 2.5 or greater safety factor as general guide. same for shear. for embedded anchors in concrete, i use 4 to 5. most anchor manufacturers use 5.
i don't have a specific reference for this, just a practice.
i am not sure what type of screw you are inquiring about. i think your asking about self tapping screws.i suggest that you contact the indugtrial fasteners institute, cleveland , oh 44114.

2009-09-15, 08:13 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	screws safety factors screws safety factors i have to check the b screws (subgirt to structure) of a building. the safety factors used in our company are undecided (from 2 to 4). could anybody suggest any refference for screws safety factors in construction? thanks in advance. check out our whitepaper library. table 3.4 in residential steel framing handbook robert schareff and the editors of the walls and ceilings magazine mc graw hill 1996 p. 71 gives capacity for steel to steel connections for steel-to-steel in tension, i try to use 2.5 or greater safety factor as general guide. same for shear. for embedded anchors in concrete, i use 4 to 5. most anchor manufacturers use 5. i don't have a specific reference for this, just a practice. i am not sure what type of screw you are inquiring about. i think your asking about self tapping screws.i suggest that you contact the indugtrial fasteners institute, cleveland , oh 44114. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]