几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - roof live load for agricultural buildings in ibc

roof live load for agricultural buildings in ibc
the ubc had a category for roof live load for greenhouses, lath houses and agricultural buildings of 10 psf (table 16-c). i'm designing my first ag building under the ibc and can find no such provision. must i double to 20 psf for flat roofs now?
thanks
-pswan
find a job or post a job opening
yes.
check with city engineer who is going to issue permit if he allows you for 10 psf. otherwise you have to go with 20 psf minimum live load.
if the slope of your greenhouse roof is enough, you will still be able to reduce the 20 psf load though.
mike mccann
mmc engineering

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-15, 07:25 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	roof live load for agricultural buildings in ibc roof live load for agricultural buildings in ibc the ubc had a category for roof live load for greenhouses, lath houses and agricultural buildings of 10 psf (table 16-c). i'm designing my first ag building under the ibc and can find no such provision. must i double to 20 psf for flat roofs now? thanks -pswan find a job or post a job opening yes. check with city engineer who is going to issue permit if he allows you for 10 psf. otherwise you have to go with 20 psf minimum live load. if the slope of your greenhouse roof is enough, you will still be able to reduce the 20 psf load though. mike mccann mmc engineering __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]