几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

properties of cables
does anyone know where i can find e and a properties for typical cables? the information that i have only covers strength properties but this doesnt help in calculating end reaction for a catenary curve.
i am looking at around 1/2" diameter overall for the cable and will specify whatever is readily available in galvanised.

see "uss wire rope engineering handbook" on this page of my website:
i believe we use 28,000ksi or 28,500 ksi for the e of p/s strand. my instructor explained that the coiling of the wire in a multi-strand rope causes the effective moe to drop.
thanks sliderule that reference was exactly what i was looking for.
dinosaur,
thanks for the input, sliderules reference gives an effective moe for various cables. for 19 wire strand it gives 19000ksi.

2009-09-15, 03:04 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	properties of cables properties of cables does anyone know where i can find e and a properties for typical cables? the information that i have only covers strength properties but this doesnt help in calculating end reaction for a catenary curve. i am looking at around 1/2" diameter overall for the cable and will specify whatever is readily available in galvanised. see "uss wire rope engineering handbook" on this page of my website: i believe we use 28,000ksi or 28,500 ksi for the e of p/s strand. my instructor explained that the coiling of the wire in a multi-strand rope causes the effective moe to drop. thanks sliderule that reference was exactly what i was looking for. dinosaur, thanks for the input, sliderules reference gives an effective moe for various cables. for 19 wire strand it gives 19000ksi. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]