几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - prestress strand - calculating debond length based on slippa

prestress strand - calculating debond length based on slippa
is anyone familiar with a method for calculating the effective debonding of a prestress strand based on its slippage?
the only reference i've found are the strand stress-strain curves, but using these will only let me calculate a prestress loss over the entire length of the member, whereas an effective debond length will only be on the end of the slippage, and give a more accurate result.
thanks
check out our whitepaper library.
if by debond length you mean transfer length then check out the link below (page 16 of 30)-
debonding is when you wrap the end of the strand at the ends of the member to relieve some of the tension at the top. i don't think this is what you're looking for.
check out the transfer length link provided by shin25.

2009-09-15, 02:40 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	prestress strand - calculating debond length based on slippa prestress strand - calculating debond length based on slippa is anyone familiar with a method for calculating the effective debonding of a prestress strand based on its slippage? the only reference i've found are the strand stress-strain curves, but using these will only let me calculate a prestress loss over the entire length of the member, whereas an effective debond length will only be on the end of the slippage, and give a more accurate result. thanks check out our whitepaper library. if by debond length you mean transfer length then check out the link below (page 16 of 30)- debonding is when you wrap the end of the strand at the ends of the member to relieve some of the tension at the top. i don't think this is what you're looking for. check out the transfer length link provided by shin25. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]