几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

post embedment design
does anyone have any experience using the equations and methods found in ansi/asae ep486.1 oct00 "shallow post foundation design"? i have the publication and i would like to see some practical examples worked out.

i am not familiar with the ansi/asae ep486.1 oct00. however, i have successfully used the following referenced in the past. they all are very similar in the derivations of their formulas. i would be interested to see how it compares the ones i listed.
1. "design of concrete foundation piers" - by frank randall, portland cement association (pca) - skokie, il, may 1968
2. "resistance to overturning of single, short piles" - by eli czerniak, asce journal of the structural division, vol. 83, no. st2, paper 1188, march 1957
3. 1997 uniform building code (ubc), section 1806.8, page 2-45
4. outdoor advertising association of america (oaaa) - new york, ny
5. "tapered steel poles - caisson foundation design", prepared for united states steel corporation by teng and associates, july 1969
regards,
lutfi
thanks for those references. ep486 was published by the american society of agricultural engineers in 2000 for the design of pole barns and the post-frame industry. it addresses lateral loads (shear and moment), uplift and gravity loads on posts.

2009-09-15, 01:37 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	post embedment design post embedment design does anyone have any experience using the equations and methods found in ansi/asae ep486.1 oct00 "shallow post foundation design"? i have the publication and i would like to see some practical examples worked out. i am not familiar with the ansi/asae ep486.1 oct00. however, i have successfully used the following referenced in the past. they all are very similar in the derivations of their formulas. i would be interested to see how it compares the ones i listed. 1. "design of concrete foundation piers" - by frank randall, portland cement association (pca) - skokie, il, may 1968 2. "resistance to overturning of single, short piles" - by eli czerniak, asce journal of the structural division, vol. 83, no. st2, paper 1188, march 1957 3. 1997 uniform building code (ubc), section 1806.8, page 2-45 4. outdoor advertising association of america (oaaa) - new york, ny 5. "tapered steel poles - caisson foundation design", prepared for united states steel corporation by teng and associates, july 1969 regards, lutfi thanks for those references. ep486 was published by the american society of agricultural engineers in 2000 for the design of pole barns and the post-frame industry. it addresses lateral loads (shear and moment), uplift and gravity loads on posts. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]