几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

panel weight and capacity of the crane
to determine the capacity from the crane when the panel is lifted from floor it is necessary, in addition to the weight of panel, to keep in mind an additional factor for the suction effect with the floor? that value is the factor?
i wait their answer of help
check out our whitepaper library.
offhand, i would suggest that the crane be rated much higher than the actual pick to account for many factors that may not be accounted for at design. however, i am not specifically aware of any suction factor applied to panels to be picked.
many times when we are dealing with work in place and have to also pick against adhesion, friction or suction it is best to have the most next highest rated crane for your operation to save time and sleep!

2009-09-15, 11:19 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	panel weight and capacity of the crane panel weight and capacity of the crane to determine the capacity from the crane when the panel is lifted from floor it is necessary, in addition to the weight of panel, to keep in mind an additional factor for the suction effect with the floor? that value is the factor? i wait their answer of help check out our whitepaper library. offhand, i would suggest that the crane be rated much higher than the actual pick to account for many factors that may not be accounted for at design. however, i am not specifically aware of any suction factor applied to panels to be picked. many times when we are dealing with work in place and have to also pick against adhesion, friction or suction it is best to have the most next highest rated crane for your operation to save time and sleep! __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]