几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

outrigger scafold engineering
i am investigating whether a wood roof structure can support an outrigger scaffold setup. the weight on the steel scaffold is approximately 1300# (mostly on the back) to counterweight the platform that hangs over the building. this results in 600# point loads on the 2 rear scaffold legs (assume 100# goes to the front legs).
a raised 2x4 @ 48鈥?o.c. roof structure sits 2鈥?above the main roof and appears to be insufficient to handle this load condition. although this is hard to picture i guess, my question is鈥?br>
has anybody run into something like this or
does anybody have any references that might help (scaffold engineering)?
thanks for your help

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-15, 11:01 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	outrigger scafold engineering outrigger scafold engineering i am investigating whether a wood roof structure can support an outrigger scaffold setup. the weight on the steel scaffold is approximately 1300# (mostly on the back) to counterweight the platform that hangs over the building. this results in 600# point loads on the 2 rear scaffold legs (assume 100# goes to the front legs). a raised 2x4 @ 48鈥?o.c. roof structure sits 2鈥?above the main roof and appears to be insufficient to handle this load condition. although this is hard to picture i guess, my question is鈥?br> has anybody run into something like this or does anybody have any references that might help (scaffold engineering)? thanks for your help __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]