几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

non-magnetic structural steels
anyone have a good list of magnetic properties for "non-magnetic" steels?
i have an application for designing a vertical reciprocating conveyor(vrc or material handling lift) typically fabricated from a36 structural shapes (w, l, c, hss sections). we need to install a lift in a research facility room with mri (high magnetic field) equipment. they ask that all parts be of non-magnetic steel. i also have to address mechanical interlocks & hardware.
i'm thinking of aluminum, 304 stainless. we have fabricated a 304 stainless lift but i'm not sure of the degree of non-magnatism.
any references or list would be appreciated.
fax 414-462-2673
find a job or post a job opening
when i worked for the navy, we used non-mag steels on minesweepers. i remember testing bolts, etc. with a small device (magnometer?). if you have access to mil-spec's, i know their is one on non-mag steels. it had all of the general properties, including magnetism. iirc, it was unclassified so you should be able to get a copy.

2009-09-10, 04:37 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	non-magnetic structural steels non-magnetic structural steels anyone have a good list of magnetic properties for "non-magnetic" steels? i have an application for designing a vertical reciprocating conveyor(vrc or material handling lift) typically fabricated from a36 structural shapes (w, l, c, hss sections). we need to install a lift in a research facility room with mri (high magnetic field) equipment. they ask that all parts be of non-magnetic steel. i also have to address mechanical interlocks & hardware. i'm thinking of aluminum, 304 stainless. we have fabricated a 304 stainless lift but i'm not sure of the degree of non-magnatism. any references or list would be appreciated. fax 414-462-2673 find a job or post a job opening when i worked for the navy, we used non-mag steels on minesweepers. i remember testing bolts, etc. with a small device (magnometer?). if you have access to mil-spec's, i know their is one on non-mag steels. it had all of the general properties, including magnetism. iirc, it was unclassified so you should be able to get a copy. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]