几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

natural frequency / vortex shedding
i'm currently working on a 50 m tall steel tower structure that has a slender footprint of 3.8 m x 3.8 m square. the structure is made up of tube steel columns (one at each corner and one at the mid point of each face - 8 columns total) with inverted chevron bracing. a wind study has been performed with some generic assumptions by an outside consultant based upon the geometry of the structure only.
my question is in regards to determining the natural frequency, which in turn will decide whether or not vortex shedding will control the design. the wind consultant has assumed a natural frequency of 0.7 hz. i'm hoping to find some information so that i will be able to calculate the natural frequency myself so that i am able to better verify the wind consultants numbers. any help would be greatly appreciated!!!

2009-09-10, 03:37 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	natural frequency vortex shedding natural frequency / vortex shedding i'm currently working on a 50 m tall steel tower structure that has a slender footprint of 3.8 m x 3.8 m square. the structure is made up of tube steel columns (one at each corner and one at the mid point of each face - 8 columns total) with inverted chevron bracing. a wind study has been performed with some generic assumptions by an outside consultant based upon the geometry of the structure only. my question is in regards to determining the natural frequency, which in turn will decide whether or not vortex shedding will control the design. the wind consultant has assumed a natural frequency of 0.7 hz. i'm hoping to find some information so that i will be able to calculate the natural frequency myself so that i am able to better verify the wind consultants numbers. any help would be greatly appreciated!!! __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]