几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

hold-down anchor w/ cable & turnbuckle
we have a development with a condo that is built on piles. over time, the pile has had lateral drift. this has caused the wall to be offset from the top of the pile. in order to control the drift, we would like to install an anchor or strap at the top of the pile, then use a cable & turnbuckle system tied to some hold-down anchor or base.
since the condo is on a steep hill and is hard to get to, a drilled anchor or concrete dead man would be very difficult to install. therefore, we would like to use a screw-type (auger) anchor in the ground.
assuming the soil is of good material, does anyone know of a vendor, website, etc. that i can contact that would supply this type of ground anchor with a working load capacity in the 15,000 lb. to 20,000 lb. range?
check out our whitepaper library.
a. b. chance

2009-09-09, 04:39 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	hold-down anchor w cable turnbuckle hold-down anchor w/ cable & turnbuckle we have a development with a condo that is built on piles. over time, the pile has had lateral drift. this has caused the wall to be offset from the top of the pile. in order to control the drift, we would like to install an anchor or strap at the top of the pile, then use a cable & turnbuckle system tied to some hold-down anchor or base. since the condo is on a steep hill and is hard to get to, a drilled anchor or concrete dead man would be very difficult to install. therefore, we would like to use a screw-type (auger) anchor in the ground. assuming the soil is of good material, does anyone know of a vendor, website, etc. that i can contact that would supply this type of ground anchor with a working load capacity in the 15,000 lb. to 20,000 lb. range? check out our whitepaper library. a. b. chance __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]