几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

high mast light base plate design
i have a 60 ft hml light we are installing and have been asked to check size, depth, and number of bolts required. i have all the forces, moments, and stresses provided. the base plate is circular. i have already checked many threads but do not have excess to many of the references recommended. my most currenct aci 318 manual is 1999 and i have aisc lrfd manual second edition. what i am mostly confused about is eccentricity. if anyone can provide a good basic example or know of where i can obtain material for a clear understanding of designing for the base plate and then anchor bolt size i would greatly appreciate it.
i suggest "design of welded structures", by omer blodgett.
also look at aisc design guide #1, "column base plates"

2009-09-09, 04:23 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	high mast light base plate design high mast light base plate design i have a 60 ft hml light we are installing and have been asked to check size, depth, and number of bolts required. i have all the forces, moments, and stresses provided. the base plate is circular. i have already checked many threads but do not have excess to many of the references recommended. my most currenct aci 318 manual is 1999 and i have aisc lrfd manual second edition. what i am mostly confused about is eccentricity. if anyone can provide a good basic example or know of where i can obtain material for a clear understanding of designing for the base plate and then anchor bolt size i would greatly appreciate it. i suggest "design of welded structures", by omer blodgett. also look at aisc design guide #1, "column base plates" __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]