几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

guide pin deflection
nicko12995 (visitor)1 aug 01 12:34
hello all- i could really use some suggestions on where to find some information on a problem i am researching. basically it has to do with a guide pin from 1-3" diam. (press fit and flanged type) in a 1-4" thick plate, with a force from 500-2000 lbs. acting on the pin. obviously there are many variables in this, but how can i start to look at the deflection of the pin, especially if the plate thickness to pin diameter ratio is not safe? can i predict the deflection of the pin after the yield point of the steel plate is reached? any info, web sites, resources, etc would be of much help. thanks.

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-09, 03:26 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	guide pin deflection guide pin deflection nicko12995 (visitor)1 aug 01 12:34 hello all- i could really use some suggestions on where to find some information on a problem i am researching. basically it has to do with a guide pin from 1-3" diam. (press fit and flanged type) in a 1-4" thick plate, with a force from 500-2000 lbs. acting on the pin. obviously there are many variables in this, but how can i start to look at the deflection of the pin, especially if the plate thickness to pin diameter ratio is not safe? can i predict the deflection of the pin after the yield point of the steel plate is reached? any info, web sites, resources, etc would be of much help. thanks. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]