huangyhg

foundation design for seismic - nbcc 2005
for seismic load combinatioss 1.0d+ 0.5l+ 1.0e or 1.0d+1.0e as per nbcc, the foundation design shall be checked for uls load bearing capacity. do i need to check foundation bearing pressures for seismic load combination for sls bearing capacity or only uls in case of wind or earthquake loading.

foundation design is not covered in the nbcc, however the seismic requirements focus on the non catastrophic failure. footings and foundations required to survive or perform to maintain the surviveability of the supported member must be designed under the uls philosophy.
hth

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]