几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

embed plates
we have to design some embed plates in concrete walls. any recommendations on texts that cover this subject?
check out our whitepaper library.
the pci design handbook has excellent tables and examples.
be sure to use the 6th edition of the pci handbook. i heard that the tables were due for a substantial revision, downgrading the design strengths shown in figure 6.15.
you may also use the aci 318 appendix d. the building code may also provide some stud capacities. the florida building code, based on the ibc, does this.
agree with jmiec - the pci handbook has methodoligies and examples, most of which are based on appendix d of aci 318 however a bunch of additional reseach was done by pci for close edge conditions etc. so their methods are actually more accurate than appendix d for embed type work.

2009-09-08, 10:09 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	embed plates embed plates we have to design some embed plates in concrete walls. any recommendations on texts that cover this subject? check out our whitepaper library. the pci design handbook has excellent tables and examples. be sure to use the 6th edition of the pci handbook. i heard that the tables were due for a substantial revision, downgrading the design strengths shown in figure 6.15. you may also use the aci 318 appendix d. the building code may also provide some stud capacities. the florida building code, based on the ibc, does this. agree with jmiec - the pci handbook has methodoligies and examples, most of which are based on appendix d of aci 318 however a bunch of additional reseach was done by pci for close edge conditions etc. so their methods are actually more accurate than appendix d for embed type work. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]