几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

elevated brick paver porch floor design
today, i have a question. am designing support for a brick paver floor on a clients's existing, large, covered, elevated residential porch. planning on using the wood framing assembly detail from the brick institute (bia), technical notes 14b - brick floors and pavements, part iii at this link
you might want to look at using 'stucco wire' as an alternative. the stucco wire could be secured to the sheathing and joists and 'tie down' the mortar bed.
dik
maybe some california
thanks to both dik and jae for your input. i have learned a lot researching "stucco wire". stucco is not common in my area - local contractor's could easily misuse it.
the point about the felt "leaking" in this application is well taken. i believe that updating the standard detail by replacing felt with self-sealing w r grace ice & water shield would be an improvement.
i have installed simular designs. we used pt subfloor , pt 3/4" plywood, a membrane, then durarock (or hardboard). also consider a latex modified mortor and grout, to allow for the extra movement.

2009-09-08, 09:58 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	elevated brick paver porch floor design elevated brick paver porch floor design today, i have a question. am designing support for a brick paver floor on a clients's existing, large, covered, elevated residential porch. planning on using the wood framing assembly detail from the brick institute (bia), technical notes 14b - brick floors and pavements, part iii at this link you might want to look at using 'stucco wire' as an alternative. the stucco wire could be secured to the sheathing and joists and 'tie down' the mortar bed. dik maybe some california thanks to both dik and jae for your input. i have learned a lot researching "stucco wire". stucco is not common in my area - local contractor's could easily misuse it. the point about the felt "leaking" in this application is well taken. i believe that updating the standard detail by replacing felt with self-sealing w r grace ice & water shield would be an improvement. i have installed simular designs. we used pt subfloor , pt 3/4" plywood, a membrane, then durarock (or hardboard). also consider a latex modified mortor and grout, to allow for the extra movement. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]