几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

dimensioned lumber as diaphragms
can anyone supply me with good sound information on using dimensioned lumber as diaphragms. i had some information years back but i cannot seem to relocate it. i have many documents on plywood as diaphragms but i need to see the possibility of using dimensioned lumber.
i have been intrigued over the discussion on staad.]
i have it. i use it but i don't trust it and i adhor rei and their arrogance.
i don't quite understand your question. do you mean something like a solid roof or floor made up of 2x members on edge - (or even 1"
see 1997 ubc section 2315, especially see 2315.5.4 for heavy wood panel diaphragms. 2315.5.4 gives some recommendations for diaphragms using 2x or 1x dimensional lumber.
the ubc also allows dimensional lumber to be used as a diaphragm if "calculated by principles of mechanics" this leaves the door open for some engineering creativity.
good luck
af&pa's wood frame construction manual for one- and two- family dwellings, sbc high wind edition, table 3b contains shear capacities for 5/8" lumber sheathing attached straight and diagonally. visit
thanks for all the help. we just switched to the ibc and i am still finding it hard to get the time to study it,
byron

2009-09-08, 06:49 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	dimensioned lumber as diaphragms dimensioned lumber as diaphragms can anyone supply me with good sound information on using dimensioned lumber as diaphragms. i had some information years back but i cannot seem to relocate it. i have many documents on plywood as diaphragms but i need to see the possibility of using dimensioned lumber. i have been intrigued over the discussion on staad.] i have it. i use it but i don't trust it and i adhor rei and their arrogance. i don't quite understand your question. do you mean something like a solid roof or floor made up of 2x members on edge - (or even 1" see 1997 ubc section 2315, especially see 2315.5.4 for heavy wood panel diaphragms. 2315.5.4 gives some recommendations for diaphragms using 2x or 1x dimensional lumber. the ubc also allows dimensional lumber to be used as a diaphragm if "calculated by principles of mechanics" this leaves the door open for some engineering creativity. good luck af&pa's wood frame construction manual for one- and two- family dwellings, sbc high wind edition, table 3b contains shear capacities for 5/8" lumber sheathing attached straight and diagonally. visit thanks for all the help. we just switched to the ibc and i am still finding it hard to get the time to study it, byron __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]