几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

determining wind loads on gambrel bldgs
would it be acceptable to determine wind loads on gambrel roof building that is comprised of a 14/12 and a 3/12 pitch such that the 14/12 portion of the roof system is assumed to be vertical walls (zones 1 and 4) and then the 3/12 pitch is considered to be the roof (zones 2 and 3?) or would it be more appropriate to look at the multiple pitches on the roof and determine the loads based upon (4) roof zones rather than just the normal two roof zones?
thanks.
check out our whitepaper library.
postframese - if you don't mind using an old approach to wind loading, i have a document on my website, "design of barns to withstand wind loads - 1938", that addresses gambrel buildings in detail. here is a link to the page:
worst case - consider the whole thing a wall...
thanks to both of you for your advice.

2009-09-08, 06:28 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	determining wind loads on gambrel bldgs determining wind loads on gambrel bldgs would it be acceptable to determine wind loads on gambrel roof building that is comprised of a 14/12 and a 3/12 pitch such that the 14/12 portion of the roof system is assumed to be vertical walls (zones 1 and 4) and then the 3/12 pitch is considered to be the roof (zones 2 and 3?) or would it be more appropriate to look at the multiple pitches on the roof and determine the loads based upon (4) roof zones rather than just the normal two roof zones? thanks. check out our whitepaper library. postframese - if you don't mind using an old approach to wind loading, i have a document on my website, "design of barns to withstand wind loads - 1938", that addresses gambrel buildings in detail. here is a link to the page: worst case - consider the whole thing a wall... thanks to both of you for your advice. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]