几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

deteriorated block walls
ugh! this one is ugly. some condominiums i looked at last week had masonry parapet walls. i was told these blocks were "cinder" blocks and not concrete. it appears moisture has reeked havoc on these walls. huge sections have spalled, and the area around these sections was crumbly.
there are 33 units. all have the same thing occurring. any suggestions on repair? they unfortunately, appear load bearing.
check out our whitepaper library.
furr out the walls with 2x4's @ 12" from roof to foundation perhaps? the wall will help support the load and also stopping the walls from spalling out? but where is the moisture from? got to stop that first before you do anything to fix it.
could these be lightweight block? are they filled and painted or bare?

2009-09-08, 06:22 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	deteriorated block walls deteriorated block walls ugh! this one is ugly. some condominiums i looked at last week had masonry parapet walls. i was told these blocks were "cinder" blocks and not concrete. it appears moisture has reeked havoc on these walls. huge sections have spalled, and the area around these sections was crumbly. there are 33 units. all have the same thing occurring. any suggestions on repair? they unfortunately, appear load bearing. check out our whitepaper library. furr out the walls with 2x4's @ 12" from roof to foundation perhaps? the wall will help support the load and also stopping the walls from spalling out? but where is the moisture from? got to stop that first before you do anything to fix it. could these be lightweight block? are they filled and painted or bare? __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]