几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

design of special staircase
hi guys, any of you have an idea of designing a staircase like the one shown in this website (the last one - ortopoligonales)?
this will deflect loke nothing else. to model it for deflection you will need to model it as a multiple cranked beam (with each step consisting of a vertical and a horizontal
thanks csd72. but my english is not so good, please do you have any detail or image about the reinforcement coz i cannot understand it so well. thanks again.
i did the staircase in the cornwall centre in regina, saskatchewan, canada... sort of like the first, except there was a 'gap' between the stairway from the landing up and down... took me over two weeks to analyze and design... before widespread use of computers...
dik

2009-09-08, 05:50 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	design of special staircase design of special staircase hi guys, any of you have an idea of designing a staircase like the one shown in this website (the last one - ortopoligonales)? this will deflect loke nothing else. to model it for deflection you will need to model it as a multiple cranked beam (with each step consisting of a vertical and a horizontal thanks csd72. but my english is not so good, please do you have any detail or image about the reinforcement coz i cannot understand it so well. thanks again. i did the staircase in the cornwall centre in regina, saskatchewan, canada... sort of like the first, except there was a 'gap' between the stairway from the landing up and down... took me over two weeks to analyze and design... before widespread use of computers... dik __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]