几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - 1-354247171

Hi Pabi,
Thanks for your recent help on automating the creation of cylinders in
SW.
I have another question in connection with the same project I'm working
on.
Basically, I'm trying to generate a number (as much as 150 in some
cases) of cylinders and insert them into an assembly, which in turn is
inserted into another assembly. The problem is that Sw complains that it
runs out of memory space at around the 30th cylinder even though I close
all the cylinder part files.
Is there a way I can turn off something (may be auto saving or whatever)
that can solve the problem? I must be able to insert all 150 *for
instance) into the assembly in one move. I am attaching a sample file
fyi. <<Trigem_G4_M_Path3.SLDPRT>>
Thanks in advance for your help
Daniel Brown

2007-09-04, 01:07 PM	#2
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	回复: 1-354247171 - Automating cylinder creation in SW API Hi Pabi, Thanks for your recent help on automating the creation of cylinders in SW. I have another question in connection with the same project I'm working on. Basically, I'm trying to generate a number (as much as 150 in some cases) of cylinders and insert them into an assembly, which in turn is inserted into another assembly. The problem is that Sw complains that it runs out of memory space at around the 30th cylinder even though I close all the cylinder part files. Is there a way I can turn off something (may be auto saving or whatever) that can solve the problem? I must be able to insert all 150 *for instance) into the assembly in one move. I am attaching a sample file fyi. <<Trigem_G4_M_Path3.SLDPRT>> Thanks in advance for your help Daniel Brown __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]