几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

design of aluminum base plate
hi all,
i am looking for a good reference on the design of aluminum base plates. the 2005 aluminum design manual does not cover the topic. i am working on a small aluminum walkway between two structures and have everything completed except for the column base plates. i was considering following the same procedure that is shown in aisc and just using the modified yields for aluminum. any suggestions?
thanks!
waytsh-
i have designed aluminum baseplates and i do exactly what you mention. i follow the exact same procedure as for steel, but use the properties of the aluminum.
note that if your column will be welded to the baseplate the yield stress is reduced considerably. also be sure to provide a korolath break and a galvanized plate between the aluminum plate and the grout as well as stainless or galvanized anchor rods.
good points! thanks for taking the time to write.

2009-09-08, 05:31 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	design of aluminum base plate design of aluminum base plate hi all, i am looking for a good reference on the design of aluminum base plates. the 2005 aluminum design manual does not cover the topic. i am working on a small aluminum walkway between two structures and have everything completed except for the column base plates. i was considering following the same procedure that is shown in aisc and just using the modified yields for aluminum. any suggestions? thanks! waytsh- i have designed aluminum baseplates and i do exactly what you mention. i follow the exact same procedure as for steel, but use the properties of the aluminum. note that if your column will be welded to the baseplate the yield stress is reduced considerably. also be sure to provide a korolath break and a galvanized plate between the aluminum plate and the grout as well as stainless or galvanized anchor rods. good points! thanks for taking the time to write. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]