几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

concrete building in sdc d
hi,
i am designing a building: 200ft tall and falls in sdc d. asce 7-02 section 9.5.2.2.4.1 permits 240ft tall building with specially reinf. concrete shear walls resisting < 60% of total shear. this would imply the use of other slrs, such as ordinary concrete moment frame, etc.
it has been my experience that the most economical structural system for this kind of structure is to utilize flat slab pt + shear walls. however, due to seismic requirements as described above, we have to provide a secondary system for ductility, which means 'moment frames'; and since additional formwork will be required already for slab-beam forming already, it sounds like the way to go is with specially reinf. concrete shear walls + special moment frames = dual system, with higher r. is this the right way to go?
i am hoping to collect some professional opinions of how you have dealt with this situation in the past. all inputs are greatly ppreciated.

2009-09-08, 11:46 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	concrete building in sdc d concrete building in sdc d hi, i am designing a building: 200ft tall and falls in sdc d. asce 7-02 section 9.5.2.2.4.1 permits 240ft tall building with specially reinf. concrete shear walls resisting < 60% of total shear. this would imply the use of other slrs, such as ordinary concrete moment frame, etc. it has been my experience that the most economical structural system for this kind of structure is to utilize flat slab pt + shear walls. however, due to seismic requirements as described above, we have to provide a secondary system for ductility, which means 'moment frames'; and since additional formwork will be required already for slab-beam forming already, it sounds like the way to go is with specially reinf. concrete shear walls + special moment frames = dual system, with higher r. is this the right way to go? i am hoping to collect some professional opinions of how you have dealt with this situation in the past. all inputs are greatly ppreciated. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]