几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

catwalk standards
what are good standards to use for loading (psf) and deflection (inches/span) for maintenance only catwalks.
find a job or post a job opening
the michigan building code gives a live load for cat walks. i imagine the ibc would give it also. as for the deflection i'd think that l/240 would work for the total load and l/360 for the live load.
ibc gives a catwalk ll of 60 psf. but this is for catwalks of stages and other assembly type areas. its' not clear if it applies to industrial catwalks as well.
asce 7-02 gives 40 psf and 300 lb concentrated load as minimum values for "catwalks for maintenance access".
if this is for an industrial project, suggest that you consider at least 60 psf since it may be necessary to take heavy "equipment parts" on the catwalk during maintenance operations.

2009-09-07, 11:10 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	catwalk standards catwalk standards what are good standards to use for loading (psf) and deflection (inches/span) for maintenance only catwalks. find a job or post a job opening the michigan building code gives a live load for cat walks. i imagine the ibc would give it also. as for the deflection i'd think that l/240 would work for the total load and l/360 for the live load. ibc gives a catwalk ll of 60 psf. but this is for catwalks of stages and other assembly type areas. its' not clear if it applies to industrial catwalks as well. asce 7-02 gives 40 psf and 300 lb concentrated load as minimum values for "catwalks for maintenance access". if this is for an industrial project, suggest that you consider at least 60 psf since it may be necessary to take heavy "equipment parts" on the catwalk during maintenance operations. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]