几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

beam analysis software
we have need for a software package that will place beam calcs and the moment/shear/deflection results on a single sheet. it needs to do channels also.
does anyone know of software that will do this. ram beam does not.
i don't know how complex a structure you need, but look into enercalc. it's more for componenet design, not full structures, but it does print output similar to what you're asking for.
try risa 2d - you can model most any shape and there is a "detail" sheet output of each
yes, risa is great, 3d is awesome, there is also ram, while the load generation is easier, it is a bit locked in in the method it allowes you to model
risa 2d is the best steel analysis software out there, imo.
enercalc is ok.
risa 3d has too many things to worry about for standard design.
ram works good for box buildings, but who does those anymore.
we use staad.beam. it seems to be very powerful and does composite beams, checks for vibrations, considers web holes and gives a full detailed set of calculation sheets that shows you how they did the design. we bought an entire site license for like $500 so it was cheap as well.
ramsbeam; very inexpensive and useful for both composite and non-.

2009-09-07, 02:45 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	beam analysis software beam analysis software we have need for a software package that will place beam calcs and the moment/shear/deflection results on a single sheet. it needs to do channels also. does anyone know of software that will do this. ram beam does not. i don't know how complex a structure you need, but look into enercalc. it's more for componenet design, not full structures, but it does print output similar to what you're asking for. try risa 2d - you can model most any shape and there is a "detail" sheet output of each yes, risa is great, 3d is awesome, there is also ram, while the load generation is easier, it is a bit locked in in the method it allowes you to model risa 2d is the best steel analysis software out there, imo. enercalc is ok. risa 3d has too many things to worry about for standard design. ram works good for box buildings, but who does those anymore. we use staad.beam. it seems to be very powerful and does composite beams, checks for vibrations, considers web holes and gives a full detailed set of calculation sheets that shows you how they did the design. we bought an entire site license for like $500 so it was cheap as well. ramsbeam; very inexpensive and useful for both composite and non-. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]