几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

basement for existing structure
we need to install a water proof basement under an existing buildings wall, probably using structural steel frame:
natural clay becoming firmer with depth at 7 ft from ground level
objective is to avoid having to shore up the walls, if possible.
has any one experience of the following method
1. placing a pillar outside and at each end of a wall
2. inserting girder connecting pillars
3. internal support pillars where necessary
4. do this for all walls to create supporting structural load baring frame
are there alternatives?
jon
jon:
what is the physical size of the existing building? is it a single/double storey? what was it is made of?
this is a tradional brick building with slate roof:
ground approx 1,800 sq ft and two other stories above

total including ground is approx 3,000 sq ft.

2009-09-07, 02:32 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	basement for existing structure basement for existing structure we need to install a water proof basement under an existing buildings wall, probably using structural steel frame: natural clay becoming firmer with depth at 7 ft from ground level objective is to avoid having to shore up the walls, if possible. has any one experience of the following method 1. placing a pillar outside and at each end of a wall 2. inserting girder connecting pillars 3. internal support pillars where necessary 4. do this for all walls to create supporting structural load baring frame are there alternatives? jon jon: what is the physical size of the existing building? is it a single/double storey? what was it is made of? this is a tradional brick building with slate roof: ground approx 1,800 sq ft and two other stories above total including ground is approx 3,000 sq ft. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]