几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

applicable dead loads
i'm looking for a reference book that would have the common dead loads for building materials for a wood frame house. such items as 2x4 stud walls with sheetrock, etc.
check out our whitepaper library.
check the ansi/asce standard 7-88 "minimum design loads for buildings and other structures." i think there may be a newer release (7-93?), but it should steer you in the right direction.
"time-saver standards for architectural design data" by john callender has lots of good, building stuff in it.
there is a release asce 7-95 and one about to be released asce 7-99. this is the industry wide bible for building loads.
thanks for your replies.
asce 7-02 lists 16 psf for 3/4" ceramic or quarry tile on 1/2" mortar bed. what do you use for the dead load in normal homes that have 3/8" tile with the backer board?
with the backer board grouted down and the grout for the tile you have about 1/2" of mortar, i'm assuming the 16 psf above includes the backer board.
part 6 of the aisc manual of steel construction.
check on the appendix in pci handbook, it has a table summarizing building material weights.
this was posted not too long ago.

2009-09-07, 12:33 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	applicable dead loads applicable dead loads i'm looking for a reference book that would have the common dead loads for building materials for a wood frame house. such items as 2x4 stud walls with sheetrock, etc. check out our whitepaper library. check the ansi/asce standard 7-88 "minimum design loads for buildings and other structures." i think there may be a newer release (7-93?), but it should steer you in the right direction. "time-saver standards for architectural design data" by john callender has lots of good, building stuff in it. there is a release asce 7-95 and one about to be released asce 7-99. this is the industry wide bible for building loads. thanks for your replies. asce 7-02 lists 16 psf for 3/4" ceramic or quarry tile on 1/2" mortar bed. what do you use for the dead load in normal homes that have 3/8" tile with the backer board? with the backer board grouted down and the grout for the tile you have about 1/2" of mortar, i'm assuming the 16 psf above includes the backer board. part 6 of the aisc manual of steel construction. check on the appendix in pci handbook, it has a table summarizing building material weights. this was posted not too long ago. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]