几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

anchor rod material
i'm looking at the 3rd ed. lrfd at the preferred material specification for anchor rods (pg. 2-26), and i see f1554 gr. 36. quiet frankly, i havent heard of that spec. i've been calling out a36 anchor rods. what has everyone else been doing, and is f1554 common in all fabricatiors shops now?

f1554 is a relatively new material spec. check out this article from modern steel construction, march, 1999:
good job, mattman!
excellent info, mattman. change the last url reference to contentid=2587 instead of 2585 to get all three of the series. (shapes, plates, bolts)
so have you guys been calling out a36 rods or f1554? i usually have a note that says all miscellaneous steel to be a36, but i guess that should change, no?
we've normally specified a36. the f1554 is new to me.

2009-09-07, 11:58 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	anchor rod material anchor rod material i'm looking at the 3rd ed. lrfd at the preferred material specification for anchor rods (pg. 2-26), and i see f1554 gr. 36. quiet frankly, i havent heard of that spec. i've been calling out a36 anchor rods. what has everyone else been doing, and is f1554 common in all fabricatiors shops now? f1554 is a relatively new material spec. check out this article from modern steel construction, march, 1999: good job, mattman! excellent info, mattman. change the last url reference to contentid=2587 instead of 2585 to get all three of the series. (shapes, plates, bolts) so have you guys been calling out a36 rods or f1554? i usually have a note that says all miscellaneous steel to be a36, but i guess that should change, no? we've normally specified a36. the f1554 is new to me. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]