几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - seat track extrusion

seat track extrusion - bac1520-841
hi there,
i am looking for a seat track extrusion used in boeing aircraft.
i am having difficulties to find bac1520-841 seat track extrusions which are already drilled with the standard hole pattern (dia.0.78", pitch 1").
does anybody knows where i could purchase such an extrusion?
thanks in advance for your help.
benny.
check out our whitepaper library.
not familiar with the -841 extrusion, but other seat track extrusions that i have dealt with in the past, -792, -2789, came undrilled and we had to send it to the machine shop to induce the hole pattern, we also found that it was easier for the machine shop to scallop the lower flanges where it crosses the floor beams therefore we initiated an in-house dwg and part number to have lengths of the seat track fabricated from the stock extrusion and stocked. then when a mechanic needed a section he pulled the pre-drilled and pre scalloped part from stock.
benny -
bac1520-841 is the same as tms 60-5034 (transtar, tiernay, castle, or whatever they call themselves nowadays).
you will have to specify drilled per ms33601 to have it come that way.
hope that helps.
you might want to try at

2009-09-06, 09:20 AM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	seat track extrusion - bac1520-841 seat track extrusion - bac1520-841 hi there, i am looking for a seat track extrusion used in boeing aircraft. i am having difficulties to find bac1520-841 seat track extrusions which are already drilled with the standard hole pattern (dia.0.78", pitch 1"). does anybody knows where i could purchase such an extrusion? thanks in advance for your help. benny. check out our whitepaper library. not familiar with the -841 extrusion, but other seat track extrusions that i have dealt with in the past, -792, -2789, came undrilled and we had to send it to the machine shop to induce the hole pattern, we also found that it was easier for the machine shop to scallop the lower flanges where it crosses the floor beams therefore we initiated an in-house dwg and part number to have lengths of the seat track fabricated from the stock extrusion and stocked. then when a mechanic needed a section he pulled the pre-drilled and pre scalloped part from stock. benny - bac1520-841 is the same as tms 60-5034 (transtar, tiernay, castle, or whatever they call themselves nowadays). you will have to specify drilled per ms33601 to have it come that way. hope that helps. you might want to try at __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]