几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子

jp10 jet fuel resistant potting material
can anyone recommend a potting compound for an electronic circuit card that could withstand jp10 fuel vapour for 30 days without significant swelling or degradation ?
thanks
nick stilwell
check out our whitepaper library.
how about pr1422 fuel tank sealant. i'v enver used it on electronics but i suspect it would be ok - worth a try.
try to look at bms8-68d. this is also found by part number cs3808 and is multi part kit. boeing uses this potting compound on electrical connectors for fuel qty system and is in jp-8. i don't know if it is compatible with mil-p-87107, but chances are good?

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-05, 11:03 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	jp10 jet fuel resistant potting material jp10 jet fuel resistant potting material can anyone recommend a potting compound for an electronic circuit card that could withstand jp10 fuel vapour for 30 days without significant swelling or degradation ? thanks nick stilwell check out our whitepaper library. how about pr1422 fuel tank sealant. i'v enver used it on electronics but i suspect it would be ok - worth a try. try to look at bms8-68d. this is also found by part number cs3808 and is multi part kit. boeing uses this potting compound on electrical connectors for fuel qty system and is in jp-8. i don't know if it is compatible with mil-p-87107, but chances are good? __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]