几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - iso way of tolerancing vs ansi 92768 vs 14.50

iso way of tolerancing vs ansi (2768 vs 14.5)
i was wondering how do people tolerance their drawing in europe. o they use the iso 2768 system? do they insert the tolerance table by range in the drawing or just a "iso 2768-m" note?
could i use the ansi way (with number of digit for tolerance) and just convert my units to mm and write not standard or ansi standard?
i prefer the ansi system but i have to deal a lot with europe and the non usa world...
robin
we are a metric company in the us with other facilities in europe. our title block has the note "default tolerences per iso 2768-m". this has been sufficient for items made in both locations.
i would avoid writing a custom tolerance block, it has a tendancy to be ignored...

2009-09-05, 07:10 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	iso way of tolerancing vs ansi 92768 vs 14.50 iso way of tolerancing vs ansi (2768 vs 14.5) i was wondering how do people tolerance their drawing in europe. o they use the iso 2768 system? do they insert the tolerance table by range in the drawing or just a "iso 2768-m" note? could i use the ansi way (with number of digit for tolerance) and just convert my units to mm and write not standard or ansi standard? i prefer the ansi system but i have to deal a lot with europe and the non usa world... robin we are a metric company in the us with other facilities in europe. our title block has the note "default tolerences per iso 2768-m". this has been sufficient for items made in both locations. i would avoid writing a custom tolerance block, it has a tendancy to be ignored... __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]