几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - ansi 9standards0 code issues

ansi ansi b16.9 & b36.10
hi frndz,
for a line having pipe as per ansi b36.10 (od and thickness), i am taking the fittings as per b16.9. and specifying the thickness of the fitting same as that of pipe.
is it correct to take thickness the same as pipe.
b16.9 doesn't talk about the thickness.
so can i take any thickeness as per my convenience? ( as the scope in the std mentions, "any producible thickenss")
thank you,
hiren.
check out our whitepaper library.
i recommend that you read section 2 of asme b16.9 and especially para. 2.1
this should answer your questions.
nozzletwister
houston, texas

__________________
借用达朗贝尔的名言：前进吧，你会得到信心!
[url="http://www.dimcax.com"]几何尺寸与公差标准[/url]

2009-09-05, 03:52 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	ansi 9standards0 code issues - ansi b16.9 b36.10 ansi ansi b16.9 & b36.10 hi frndz, for a line having pipe as per ansi b36.10 (od and thickness), i am taking the fittings as per b16.9. and specifying the thickness of the fitting same as that of pipe. is it correct to take thickness the same as pipe. b16.9 doesn't talk about the thickness. so can i take any thickeness as per my convenience? ( as the scope in the std mentions, "any producible thickenss") thank you, hiren. check out our whitepaper library. i recommend that you read section 2 of asme b16.9 and especially para. 2.1 this should answer your questions. nozzletwister houston, texas __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]