几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - ansi 9standards0 code issues

ansi amse pictorial drawing
hello everyone,
in asme y14.4m-1989 "pictorial drawings" i need to know what the standard is for assembly layouts. my question is if i show an exploded front isometric view on 1/2 of sheet1 and a reverse isometric view on the other half, do i need to use a view line to show how i derived the view? i guess what i am asking is do we have to follow asme y13.3m-1994 convention on assembly/critical feature drawings?
thanks.
matt b.
as far as i know, i think if you write "isometric" below the views, you will be fine.
fyi, you should be following asme y14.4m-1994
ctopher,
my standard says asme y14.5m-1994, am i missing something?
bradley
i apologize, i miss-read. i thought i was looking at asme y14.5m-1989. you are right. that's what happens when i read too fast.

2009-09-05, 03:45 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	ansi 9standards0 code issues - amse pictorial drawing ansi amse pictorial drawing hello everyone, in asme y14.4m-1989 "pictorial drawings" i need to know what the standard is for assembly layouts. my question is if i show an exploded front isometric view on 1/2 of sheet1 and a reverse isometric view on the other half, do i need to use a view line to show how i derived the view? i guess what i am asking is do we have to follow asme y13.3m-1994 convention on assembly/critical feature drawings? thanks. matt b. as far as i know, i think if you write "isometric" below the views, you will be fine. fyi, you should be following asme y14.4m-1994 ctopher, my standard says asme y14.5m-1994, am i missing something? bradley i apologize, i miss-read. i thought i was looking at asme y14.5m-1989. you are right. that's what happens when i read too fast. __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]