几何尺寸与公差论坛------致力于产品几何量公差标准GD&T (GDT:ASME)|New GPS(ISO)研究/CAD设计/CAM加工/CMM测量 - 查看单个帖子 - ansi 9standards0 code issues

ansi a refrence for symbols on
howdy ya'll,
i'm a inspector or a dod subcontractor. i do alot of dimensional inspection(parts, components ect.) i'm @ a loss in interpeting the various symbols used on the drawings(meaning, i have never had that type of training)i was wondering if any-1 here would know of a on-line resource for these. any help would b gratefully appreciated!!
tia.!!
eng-tips forums is member supported.
look into the book
asme y14.5m-1994 for dimensioning and tolerancing
bradley
sorry, but that's pretty scary. how can you be an inspector if you don't know what the symbols mean? gd&t is highly complex and many people that think they understand it, do not.
i am not trying to be mean, but if you intend to succeed in this job, i would suggest getting some schooling.
ray havermahl
independent engineering labs
i highly agree with testy. you must already be able to understand drawings to succeed.
thank ya'll for your input. it is appreciated!
@ testy.. my tenure has been 99% in the electronics manufacturing sector. i have recently accepted my present position. in the past.. employers & peer's as well, have allway's considerd me to be a fairly bright chap. i just need a guide, as to the meanings of the symbols. if i come across something "over my head", i have access to the engineering department. again.. thank ya'll for your input!

2009-09-05, 03:42 PM	#1
huangyhg 超级版主注册日期: 04-03 帖子: 18592 精华: 36 现金: 249466 标准币资产: 1080358888 标准币	ansi 9standards0 code issues - a refrence for symbols on ansi a refrence for symbols on howdy ya'll, i'm a inspector or a dod subcontractor. i do alot of dimensional inspection(parts, components ect.) i'm @ a loss in interpeting the various symbols used on the drawings(meaning, i have never had that type of training)i was wondering if any-1 here would know of a on-line resource for these. any help would b gratefully appreciated!! tia.!! eng-tips forums is member supported. look into the book asme y14.5m-1994 for dimensioning and tolerancing bradley sorry, but that's pretty scary. how can you be an inspector if you don't know what the symbols mean? gd&t is highly complex and many people that think they understand it, do not. i am not trying to be mean, but if you intend to succeed in this job, i would suggest getting some schooling. ray havermahl independent engineering labs i highly agree with testy. you must already be able to understand drawings to succeed. thank ya'll for your input. it is appreciated! @ testy.. my tenure has been 99% in the electronics manufacturing sector. i have recently accepted my present position. in the past.. employers & peer's as well, have allway's considerd me to be a fairly bright chap. i just need a guide, as to the meanings of the symbols. if i come across something "over my head", i have access to the engineering department. again.. thank ya'll for your input! __________________ 借用达朗贝尔的名言：前进吧，你会得到信心! [url="http://www.dimcax.com"]几何尺寸与公差标准[/url]